CARLUEX PRO+ 2.0 Software Update (Version 20260120)

We are pleased to announce the release of the latest software update for the CARLUEX PRO+ 2.0, Version 20260120.

🚀 Change Log

1. Resolved Waze Display Issue: Fixed the black screen bug occurring when Waze is displayed in a small window/split-screen mode.

2. Vertical Screen Optimization: Corrected the boot animation distortion on vertical (portrait) head units.

3. Improved Autostart Logic: Fixed the issue where selected startup apps failed to launch automatically after a device reboot.

4. Protocol Enhancements: Updated system protocols for improved vehicle compatibility.

---

📥 Download Link

Please download the update file from the link below: Download Version 20260120

---

🔧 Software Installation Guide (Via Vehicle Head Unit)

Please follow these steps carefully to ensure a successful update:

1. Prepare the Update File

   • Download the software update file and save it directly to a blank TF card.

   • ⚠️ Important: Do not rename the file and do not place it inside any folder.

2. Insert the TF Card

   • Insert the TF card into your CARLUEX PRO+ 2.0. The system will automatically detect the file within 10 seconds.

3. Install the Software

   • When prompted, tap "Install".

   • The update process will take approximately 12–15 minutes.

   • ⚠️ Warning: Do not power off the device or remove the TF card during the update.

4. Complete the Update

   • Once the system reboots and the home screen appears, remove the TF card.

   • Delete the update file from the card to prevent automatic reinstallation next time.

5. Verify & Factory Reset (Recommended)

   • Go to Settings and confirm the system shows: CARLUEX Version 20260120.

   • For optimal performance, we strongly recommend performing a factory reset: Settings → More settings → System → Reset options → Erase all data.

---

⚡ Power-On Update Method (Alternative)

Recommended if your device cannot connect to the head unit despite the vehicle supporting wired CarPlay.

Powering the Device:

• Use a high-quality phone charging adapter + the original CARLUEX data cable (do not use a computer USB port).

Step-by-Step Instructions:

1. Power on the CARLUEX PRO+ 2.0 and wait for the LED to change from red to solid blue.

2. Insert the prepared TF card.

3. The LED indicator will begin flashing red, indicating the update is in progress.

4. Once the update is complete, the LED will return to solid blue.

5. Remove the TF card and delete the update file.

---

Support Note: If you encounter any issues during this process, please feel free to reach out to the CARLUEX Support team.